For decades there was one reputable path to store data on a computer – working with a hard drive (HDD). Having said that, this type of technology is by now showing it’s age – hard drives are noisy and slow; they can be power–ravenous and tend to produce a great deal of heat during serious operations.
SSD drives, however, are fast, use up a lot less energy and they are far less hot. They offer an exciting new method of file access and storage and are years in front of HDDs when it comes to file read/write speed, I/O performance and then power efficiency. Discover how HDDs fare against the newer SSD drives.
1. Access Time
After the introduction of SSD drives, file access rates have gone over the top. On account of the brand–new electronic interfaces made use of in SSD drives, the average data file access time has been reduced to a record low of 0.1millisecond.
HDD drives even now makes use of the same basic data file access technology that was originally created in the 1950s. Though it has been much upgraded since that time, it’s slow compared with what SSDs are offering to you. HDD drives’ data file access speed varies somewhere between 5 and 8 milliseconds.
2. Random I/O Performance
The random I/O performance is critical for the effectiveness of a file storage device. We have executed detailed assessments and have determined that an SSD can handle at the very least 6000 IO’s per second.
With an HDD drive, the I/O performance progressively enhances the more you employ the disk drive. Nevertheless, just after it reaches a certain cap, it can’t get speedier. And because of the now–old concept, that I/O limitation is noticeably less than what you might get having an SSD.
HDD are only able to go as much as 400 IO’s per second.
3. Reliability
SSD drives are lacking just about any rotating elements, meaning there’s far less machinery included. And the less actually moving elements you’ll find, the fewer the prospect of failure are going to be.
The standard rate of failure of an SSD drive is 0.5%.
To have an HDD drive to function, it should spin a few metal disks at a minimum of 7200 rpm, holding them magnetically stabilized in the air. There is a wide range of moving elements, motors, magnets along with other gadgets packed in a tiny place. So it’s no surprise that the regular rate of failing of an HDD drive varies among 2% and 5%.
4. Energy Conservation
SSDs don’t have any moving elements and require not much cooling power. Additionally they require not much electricity to perform – tests have revealed that they can be powered by a regular AA battery.
In general, SSDs consume between 2 and 5 watts.
HDD drives are famous for being noisy. They need extra electricity for cooling applications. With a web server that has different HDDs running regularly, you will need a good deal of fans to keep them kept cool – this makes them far less energy–economical than SSD drives.
HDDs take in somewhere between 6 and 15 watts.
5. CPU Power
The speedier the data file access speed is, the sooner the data calls can be handled. As a result the CPU won’t have to arrange resources looking forward to the SSD to reply back.
The average I/O delay for SSD drives is just 1%.
HDD drives enable reduced access speeds rather than SSDs do, resulting for the CPU required to wait around, whilst scheduling allocations for your HDD to uncover and return the required file.
The regular I/O delay for HDD drives is around 7%.
6.Input/Output Request Times
The majority of WebHosting-Store.net’s completely new machines are now using only SSD drives. Our own tests have demostrated that utilizing an SSD, the typical service time for an I/O request while operating a backup continues to be under 20 ms.
All through the very same tests with the exact same hosting server, this time suited out with HDDs, general performance was noticeably reduced. Throughout the server backup procedure, the common service time for I/O demands ranged between 400 and 500 ms.
7. Backup Rates
You’ll be able to notice the real–world added benefits of utilizing SSD drives on a daily basis. By way of example, on a web server pre–loaded with SSD drives, a complete data backup is going to take simply 6 hours.
Throughout the years, we’ve used mostly HDD drives with our machines and we’re knowledgeable of their effectiveness. On a web server equipped with HDD drives, a complete hosting server back up may take about 20 to 24 hours.
Our Linux shared hosting services accounts offer SSD drives by default. Join our WebHosting-Store.net family, to see the way we can assist you supercharge your site.
Hepsia
- Live Demo
Service guarantees
- All of our Virtual Private Servers provide no installation charges and operate in a steady network delivering 99.9% of uptime. Full root server access rights guaranteed.
Compare our prices
- Examine the tools and features coming with our Virtual Private Servers. You could start with a smaller VPS Web Hosting setup and move up with simply a click of the mouse as your demands grow.
- Compare our hosting plans
Contact Us
- We are on duty for you 7 days a week to respond to any kind of inquiries with regards to our VPS Web Hosting services. 60–min response time frame warranty.